Spreadtrum Official Stock Firmware File Flashing Method

by Arafat Ikram Shanto · September 24, 2018

Spreadtrum Official Stock Firmware File Flashing Method (Via SPD Flash Tools)

Flashing official stock firmware/rom in Spreadtrum SC-xx chipset based device is very easy with SPD flash tools. This process is very similar to mediatek’s SP Flash tool flashing process. First of all you need to collect the stock firmware file for your device. After that install driver and flash the firmware. Using SPD Flash tools to flash is just a piece of cake. For additional information, download link please check out the full article.

Page Contents

1 Spreadtrum Official Stock Firmware File Flashing Method (Via SPD Flash Tools)
2 Disclaimer
3 Downloads And Requirements
4 Firmware File Flashing Process
5 You may also Like to see

Spreadtrum Official Stock Firmware File Flashing Method (Via SPD Flash Tools)

Stock Firmware File Flashing Method by Spreadtrum -SPD Flash Tools

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/ROM/tweaker’s results to void of the warranty of the device. (We) RaphsonBD and its authorswill not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

Downloads And Requirements

In Order to start the stock firmware installation process, in your PC via Spreadtrum flash tool. first you need to download the necessary files from download link and also install the USB driver in your computer.

Firmware File Flashing Process

How to Install Stock Rom/Firmware in Any Spreadtrum Device

First of all install the Spreadtrum USB Driver and download Spreadtrum Flash Tool (SPD Flash Tools) and Stock Firmware file for your Spreadtrum chipset based device.
Now open SPD Flash Tool and run the ResearchDownload.exe (Run as administrator)
Now click on Load Pack and go to the firmware folder and select the .pac file.

Wait for the firmware files to load
Now click on Setting and go to the firmware folder and select the .pac file.

After that make sure that “Select All Files” is on tick and all the file are selected like screenshots bellow.

Now hit “OK” and press “Start” button. and connect your phone via USB cable with battery.

After that press on start to flash-the item

Wait for all the firmware file to be flashed.

If everything goes as shown, When you will see a “Passed” message
Voila. You were successful in Spreadtrum Official Stock Firmware File Flashing Method via SPD Flash Tools