Miscellaneous

Spreadtrum Custom Recovery Installation Method

Spreadtrum Custom Recovery Installation Method 

Spreadtrum chipset based device custom recovery installation method is very simple and easy. Spreadtrum chipset are very cheap.While Qualcomm and Mediatek dominate the mobile processor market, but then little-known Spreadtrum is also making moves in the sector.  Spreadtrum has already launched chipsets in 2017 that support carrier aggregation. Our chipsets, SC9853 and SC9850 that are already being adopted by Indian as well as global brands are integrated with carrier aggregation.  So when it comes to build a cheap android device, than after mediatek one name stood up and that is Spreadtrum. Considering low price Spreadtrum has low configuration too. So if you want to tweak or boost performance or use any custom components then you will need a custom recovery. This post will help you to flash custom recovery TWRP/PhilZ Touch recovery in your Spreadtrum chipset based device very easily.

 

Spreadtrum Custom Recovery Installation Method

Spreadtrum Custom Recovery Installation Method
Spreadtrum Custom Recovery Installation Method

 

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/ROM/tweaker’s results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Downloads  And Requirements

In Order to start the process, first you need to download the necessary files from download link and also install the USB driver in your computer.

 

Recovery Flashing Process

How to Install Custom Recovery in Any Spreadtrum Device

  • First of all install the Spreadtrum USB Driver and download SPD Flash Tool and recovery.img for your Spreadtrum chipset based device.
  • Now open SPD Flash Tool and run the ResearchDownload.exe (Run as administrator)
  • Now click on Load Pack and go to the firmware folder and select the .pac file.
Choose .pac SPD Flash Tools
  • Wait for the firmware files to load
  • Now click on Setting and go to the firmware folder and select the .pac file.
SPD Flash Tool Setting loading Firmware .pac-file
  • After that hit over “Select All Files” to unselect all of them and then only select the recovery section. and right click on recovery and browse the recovery file you want to flash and select the recovery.img
  • Now hit “OK” and press “Start” button. and connect your phone via USB cable with battery.
After that press on start to flash-the item
After that press on start to flash-the item
  • Wait for the recovery.img is being flashed,
image file is being flashed through SPD flash tool.
  • If everything goes as shown, When you will see a “Passed” message
  • Voila. You were successful in Spreadtrum Custom Recovery Installation Method.

 


 

Related Post

Tags : Spreadtrum Custom RecoverySpreadtrum Firmware File
Arafat Ikram Shanto

The author Arafat Ikram Shanto

Just a common man with common thought

Leave a Response