How to flash Samsung Stock/Official ROM via Odin

ODIN is a program used for rooting, installing custom recoveries, and installing stock firmwares for Samsung smartphones and tablets. You can run this Odin program on any Windows computer.  You will need the latest ODIN V3.10.6 to root latest Samsung Galaxy S6 and S6 Edge.  This ODIN is also backward-compatible with older Galaxy devices.

 

How to flash Samsung Stock/Official ROM via Odin

How to flash Samsung Stock/Official ROM via Odin

 

Downloads and Requirements

  • ODIN V3.10.6 – Download
  • FLASHING STOCK ROM VIA ODIN WILL DEFINITELY WIPE YOUR DATA. SO MAKE BACKUP FIRST.

 

Flash Samsung Stock ROM (Official/Original Firmware) via Odin

 

  • Step 1: Download and install device driver software on your computer

If you have used Kingo android Root already, skip this step. Otherwise, do it manually. Following are ways to do this…

  1. Visit Samsung official website to find the correspondent driver software.
  2. Google the driver software of your device. Download and then install it on you computer.
  3. Download or update Kies, part of which will install or update drivers.

Once drivers are installed or updated, it is highly recommended that you restart your computer.

 

  • Step 2: Download and extract the Stock ROM (Official/Original Firmware)
SamMobile may be the best choice to download stock firmware of Samsung device Or you can go to Samsung Updates, XDA Forum or Google to find the correspondent firmware of your device.

How to flash Samsung Stock/Official ROM via Odin

Click “Firmware” and enter your device model

How to flash Samsung Stock/Official ROM via Odin

After downloading it (normally a compressed file), you need to extact/unzip it to certain location of your PC. The file types that Odin uses are *.bin,*.tar and *.tar.md5.
How to flash Samsung Stock/Official ROM via Odin

You will find a *.md5 file after extracting.

 

  • Step 3: Download and extract Odin on you PC.

You can download Odin V3.10.7 directly from SamMobileAndroidMTK is a fine alternative which also offers a detailed list of Odin versions and download link Or you can always Google “Odin download”.  After downloading it on your PC, extract it to Desktop or another location you’d prefer.

How to flash Samsung Stock/Official ROM via Odin
Odin v3.10.7 zip file
After extracting, right-click to “Open as Administrator”. It may prevent certain issue from happening.
How to flash Samsung Stock/Official ROM via Odin

Run Odin as administartor which is recommended.

 

  • Step 4: Boot your Samsung device into Download mode

Follow these steps to enter Download Mode/Odin Mode

  1. Power off your device
  2. Press and hold Volume Down key, Home Key and Power Key
  3. When your device vibrates, release Power key while keep holding the Volume Down key and Home-key

How to root the Galaxy S7 and S7 Edge

Warning before entering into download mode4 Press Volume Up key to enter Download mode, which has a green robot figure and “Downloading… Do not turn off target!!)

How to flash Samsung Stock/Official ROM via Odin
boot-into-download-mode-2

Now you are in download mode.

 

  • Step 5: Connect your device to PC.

You device should be automatically recognized by Odin. At the lower-left of Odin interface, it should show a message that says “Added!” and in the meantime you should see a light-blue box at the ID:COM section stating “COM:3” (the number depend on which USB port you have plugged the device cable and is irrelevan

How to flash Samsung Stock/Official ROM via Odin
odin-3.10.7-device-added

Device is connected to Odin.

 

  • Step 6: Click “PDA” or “AP” to add tar.md5 file that you have extracted and then “Start”

Whether it is “PDA” or “AP” depends on the version of Odin that you used but the md5 file goes to either “PDA” or “AP”.

How to flash Samsung Stock/Official ROM via Odin
odin-3.10.7-md5-added

Add *.md5 to Odin.
After adding the file, click “Start” to begin the flashing process.

How to flash Samsung Stock/Official ROM via Odin
Odin-3.10.7-click-start

Click “Start” to flash.

WARNING: DO NOT REMOVE OR OPERATE ON YOUR DEVICE UNTIL FINISHED OR FAILED IS SHOWED ON ODIN. 

How to flash Samsung Stock/Official ROM via Odin
Odin Flash Start

Ongoing flashing process. Do not remove your device. When the flashing process is done and if everything goes well, you should see a big green box saying “RESET” or “PASSED” (depends on the version of Odin is used).

How to flash Samsung Stock/Official ROM via Odin
Odin Flash Succeed

 

Flash succeeded.If failed to flash Samsung Stock/Official ROM, what should you do?
Try these things first:

  • Update your device driver software to the latest.
  • Restart your computer.
  • Run Odin as Administrator.
  • Try different cable (original one or the one with better quality) and USB port (the main port recommended)
  • Re-download the firmware file, make sure it is intact and match your device model

 


 

Related Post

1 Comment

  1. Reading your blog gave me a lot of interesting informations , it deserves
    to go viral, you need some initial traffic only. How to get initial traffic???
    Search for: masitsu’s tricks

Leave a Response

*

code