Custom Recovery

Huawei P8 Lite Custom Recovery TWRP (One Click Installer)

TWRP Custom Recovery Installation Method – Raphsonbd.com

Huawei P8 Lite Custom Recovery TWRP (One Click Installer) (Download and Installation Method) 

TWRP for Huawei P8 Lite is free custom recovery which is completely stable and bug free. Team Win Recovery Project (TWRP) is an open-source software fully touch supported custom recovery image for Huawei P8 Lite . You can use this recovery to backup your phone’s stock rom, flash new custom rom etc etc. for additional information and download link, check out the full article.

 

Huawei P8 Lite Custom Recovery TWRP (One Click Installer)

Huawei P8 Lite Custom Recovery TWRP (One Click Installer) (Download and Installation Method) 
TWRP for Huawei P8 Lite

 

Description

Recovery Name: TWRP – Team Win Recovery Project

Recovery Version: 3.0.2

Recovery Status:  Stable, Unofficial

Device: Huawei P8 Lite

Device Chipset: HiSilicon Kirin 620

Recovery Size: 15.20  MB

Language: English/ Multi language supported

Uploaded by RECTIFIER

 

 Features

  • Install – Flash a ROM or zip,
  • Wipe – Wipe data or factory reset / Advance Wiping option
  • Backup – Make a Nandroid backup
  • Restore – Restore a Nandroid backup
  • Mount – Mount partitions
  • Settings – TWRP Settings (change brightness, interface, language, even you can lock your TWRP)
  • Advanced options
    • Fix permissions
    • ADB Sideload
    • File Manager
  • Advanced Reboot
    • Reboot to System
    • Reboot Recovery
    • Reboot Bootloader
    • Power off
  • Fully touch supported and easy to use interface.

 

Bugs

  • No bugs

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite/Requirements

In order to flash the TWRP – recovery in your Huawei P8 lite, You will need a bootloader unlocked device and also you need to install ABD/Minimal ADB fastboot driver in your PC.

 

Downloads

In order to flash the Official build of Huawei P8 Lite Custom Recovery TWRP (One Click Installer), first you need to download all the required file from download link below.

 

How To Install TWRP Custom Recovery in Huawei P8 Lite

Huawei P8 Lite Custom Recovery TWRP Flashing Method by ADB Terminal

  • First of All, Download ADB driver or Fastboot Tools from the download link given above. Unzip and install the driver .
  • After that Extract the TWRP in Huawei P8 Lite.zip and you can find there TWRP in Huawei P8 Lite.bat Connect your Phone through USB cable a run the TWRP in Huawei P8 Lite.bat as Administrator.
  • Then Follow the step as shown. Custom recovery twrp will be installed in your device in no time.
  • Congratulation! You have now successfully install Huawei P8 Lite Custom Recovery TWRP (Team Win Recovery).

 

Here is the guide you can root your root Huawei P8 Lite—

 


 

Related Post

read more
Custom Recovery

Huawei P8 Custom Recovery TWRP (Official)

TWRP Custom Recovery Installation Method – Raphsonbd.com

Huawei P8 Custom Recovery TWRP (Download and Installation Method) 

To taste your phone in different path like using Custom Rom, increases music performance by ViperFX or Dolby Atomz, to use lucky patcher or any advance apps which will need root permission. Simply, without rooting a android phone you can not enjoy the full taste of android smartphone. To root your Huawei P8 device, first you need to install Custom recovery.  So, in this article we will show you how to install custom recovery TWRP on Huawei P8. Please read through the full article carefully to be successful.

 

Huawei P8 Custom Recovery TWRP (Download and Installation Method)

Huawei P8 Custom Recovery TWRP (Download and Installation Method) 
TWRP for Huawei P8

 

Description

Recovery Name: TWRP – Team Win Recovery Project

Recovery Version: 2.8.7.1

Recovery Status:  Stable, Unofficial

Device: Huawei P8

Device Chipset: HiSilicon Kirin 930 (arm64) (64-bit)

Recovery Size: 15.10  MB

Language: English/ Multi language supported

Uploaded by RECTIFIER

 

 Features

  • Install – Flash a ROM or zip,
  • Wipe – Wipe data or factory reset / Advance Wiping option
  • Backup – Make a Nandroid backup
  • Restore – Restore a Nandroid backup
  • Mount – Mount partitions
  • Settings – TWRP Settings (change brightness, interface, language, even you can lock your TWRP)
  • Advanced options
    • Fix permissions
    • ADB Sideload
    • File Manager
  • Advanced Reboot
    • Reboot to System
    • Reboot Recovery
    • Reboot Bootloader
    • Power off
  • Fully touch supported and easy to use interface.

 

Bugs

  • No bugs

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite/Requirements

In order to flash the TWRP – recovery in your Huawei P8 , You will need a bootloader unlocked device and also you need to install ABD/Minimal ADB fastboot driver in your PC.

 

Downloads

In order to flash the Official build of Huawei P8 Custom Recovery TWRP (Unofficial), first you need to download all the required file from download link below.

 

How To Install TWRP Custom Recovery in Huawei P8

Huawei P8 Custom Recovery TWRP Flashing Method by ADB Terminal

  • First of All, Download Fastboot Tools from the download link given above. Unzip it.
  • Download Custom Recovery TWRP from the download link. Rename the file name to recovery.img and put it on the extracted “fastboot tools” folder.
  • Now, open a command prompt window by pressing SHIFT + Right Mouse Button and click on Open New Window Here on the Fastboot Tools Folder.
  • On your mobile, Reboot your phone into fastboot mode by pressing Power Button + Volume Down button altogether. or just the bellow command to reboot into fastboot mode. #1
adb reboot bootloader
  • Connect your device into Computer by an USB Cable.

How to Flash Recovery via ADB Fastboot

  • Now, on the command prompt window, type bellow command and hit enter. #2

 

fastboot flash recovery recovery.img

 

  • Now, Type bellow command and hit enter. #3
 fastboot reboot
  • Your phone will restart now.
  • Now, switch off your phone. Hold Power Button + Volume up Button altogether to reboot into recovery mode.
  • Congratulation! You have now successfully install Huawei P8 Custom Recovery TWRP (Team Win Recovery).

 

Here is the guide you can root your root Huawei P8 —

 


 

Related Post

read more
Custom Recovery

Coolpad Note 3 Lite Custom Recovery TWRP (MT6735)

TWRP Custom Recovery Installation Method – Raphsonbd.com

Coolpad Note 3 Lite Custom Recovery TWRP (MT6735) (Download and Installation Method) 

TWRP for Coolpad Note 3 (MT6735) is free custom recovery which is completely stable and bug free. Team Win Recovery Project (TWRP) is an open-source software fully touch supported custom recovery image for android mediatek MT6735 chipset based device such as Coolpad Note 3 Lite. TWRP for Coolpad Note 3 is the unofficial build which can be ported in any android marshmallow 6.0 running MT6735 chipset based device such as Coolpad Note 3. You can use this recovery to backup your phone’s stock rom, flash new custom rom etc etc. for additional information and download link, check out the full article.

 

Coolpad Note 3 Lite Custom Recovery TWRP (MT6735) (Download and Installation Method)

Coolpad Note 3 Lite Custom Recovery TWRP (MT6735) (Download and Installation Method) 
TWRP for Coolpad Note 3 Lite

 

Description

Recovery Name: TWRP – Team Win Recovery Project

Recovery Version: 3.1.1

Recovery Status:  Stable, Unofficial

Device: Coolpad Note 3 Lite

Device Chipset: MT6735 (arm64) (64-bit)

Recovery Size: 15.10  MB

Language: English/ Multi language supported

Uploaded by RECTIFIER

 

 Features

  • Install – Flash a ROM or zip,
  • Wipe – Wipe data or factory reset / Advance Wiping option
  • Backup – Make a Nandroid backup
  • Restore – Restore a Nandroid backup
  • Mount – Mount partitions
  • Settings – TWRP Settings (change brightness, interface, language, even you can lock your TWRP)
  • Advanced options
    • Fix permissions
    • ADB Sideload
    • File Manager
  • Advanced Reboot
    • Reboot to System
    • Reboot Recovery
    • Reboot Bootloader
    • Power off
  • Fully touch supported and easy to use interface.

 

Bugs

  • No bugs

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite/Requirements

In order to flash the TWRP – recovery in your Coolpad Note 3, You need to first install the Android CDC and VCOM driver in your computer.

 

Downloads

In order to flash the unofficial build of Coolpad Note 3 Custom Recovery TWRP (MT6735) (Unofficial), first you need to download all the required file from download link below.

 

How To Install TWRP Custom Recovery in Coolpad Note 3

Coolpad Note 3 Custom Recovery TWRP Flashing Method by SP Flash-Tools

  • First and foremost install MTK CDC and VCOM driver in your PC or this flashing method will not going to work. Then download both SP Flash-Tools and TWRP and extract the zip file where you can file the two important file – recovery.img and MT6735_Android Scatter.txt.
  • After that  Go to the SP flash Tool folder and open/execute flash_tool.exe (Run as Administrator is recommended). Turn off your Coolpad Note 3, Connect your phone via USB cable with your PC.

Run SP Flash Tools as administrator - raphsonbd.com

  • Now Goto Scatter-loading section and browse the MT6735_Android Scatter.txt file where you have downloaded it and choose that file. After that you shall see the recovery file is loaded in your window with a √ on it.

How to Flash twrp philz touch custom recovery by SP flash tools

  • Now Click or Download button on above section Flash tool will stand by waiting your device to be disconnected.
  • Turn off your
  • Coolpad Note 3 and remove the battery, when you ready just connect your device to computer using USB cable, flash tool will recognize and begin to start flashing process. This will only take 5-10 second to finish.

Recovery file flashing SP Flash Tools - raphsonbd.com

  • If you can see the GREEN CIRCLE on the middle flash tool than the flashing process is finish. Voila You have successfully flashed the custom recovery in your Coolpad Note 3.

Flashing Process Successful by SP Flash Tools - RaphsonBD.com

  • Wait 5-10 second before disconnect your device, put back the battery and turn it on and go to recovery mode by pressing and holding Power Button + Volume Up  and release when you can see custom recovery main menu in your Android Smartphone. Now Your Phone Shall Reboot into Recovery Mode. After that you can go to recovery and take a complete backup of your current stock romRoot your phone or install new Custom ROM .
  • Congratulation! You have now successfully install Coolpad Note 3 Custom Recovery TWRP (Team Win Recovery) (MT6735).

 

After installing Custom recovery through SP Flash tools, You are now ready to root your Coolpad Note 3.

Here is the guide you can root your root Coolpad Note 3 —

 


 

Related Post

read more
Custom Recovery

Symphony R100 Custom Recovery TWRP (MT6737M)

TWRP Custom Recovery Installation Method – Raphsonbd.com

Symphony R100 Custom Recovery TWRP (MT6737M) (Download and Installation Method) 

TWRP for Symphony R100 (MT6737M) is free custom recovery which is completely stable and bug free. Team Win Recovery Project (TWRP) is an open-source software fully touch supported custom recovery image for android mediatek MT6737 chipset based device such as symphony R100. TWRP for symphony R100 is the unofficial build which can be ported in any android marshmallow 6.0 running MT6737m chipset based device such as symphony R100. You can use this recovery to backup your phone’s stock rom, flash new custom rom etc etc. for additional information and download link, check out the full article.

 

Symphony R100 Custom Recovery TWRP (MT6737M)

Symphony R100 Custom Recovery TWRP (MT6737M) (Download and Installation Method) 
TWRP

 

Description

Recovery Name: TWRP – Team Win Recovery Project

Recovery Version: 3.2.2

Recovery Status:  Stable, Unofficial

Device: Symphony R100

Device Chipset: MT6737 (arm) (32-bit)

Recovery Size: 13.10  MB

Language: English/ Multi language supported

Uploaded by Captain Kenway

 

 Features

  • Install – Flash a ROM or zip,
  • Wipe – Wipe data or factory reset / Advance Wiping option
  • Backup – Make a Nandroid backup
  • Restore – Restore a Nandroid backup
  • Mount – Mount partitions
  • Settings – TWRP Settings (change brightness, interface, language, even you can lock your TWRP)
  • Advanced options
    • Fix permissions
    • ADB Sideload
    • File Manager
  • Advanced Reboot
    • Reboot to System
    • Reboot Recovery
    • Reboot Bootloader
    • Power off
  • Fully touch supported and easy to use interface.

 

Bugs

  • No bugs

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite/Requirements

In order to flash the TWRP – recovery in your Symphony R100, You need to first install the Android CDC and VCOM driver in your computer.

 

Downloads

In order to flash the unofficial build of Symphony R100 Custom Recovery TWRP (MT6737M) (Unofficial), first you need to download all the required file from download link below.

 

How To Install TWRP Custom Recovery in Symphony R100

Symphony R100 Custom Recovery TWRP Flashing Method by SP Flash-Tools

  • First and foremost install MTK CDC and VCOM driver in your PC or this flashing method will not going to work. Then download both SP Flash-Tools and TWRP and extract the zip file where you can file the two important file – recovery.img and MT6737M_Android Scatter.txt.
  • After that  Go to the SP flash Tool folder and open/execute flash_tool.exe (Run as Administrator is recommended). Turn off your Symphony R100, Connect your phone via USB cable with your PC.

Run SP Flash Tools as administrator - raphsonbd.com

  • Now Goto Scatter-loading section and browse the MT6737M_Android Scatter.txt file where you have downloaded it and choose that file. After that you shall see the recovery file is loaded in your window with a √ on it.

How to Flash twrp philz touch custom recovery by SP flash tools

  • Now Click or Download button on above section Flash tool will stand by waiting your device to be disconnected.
  • Turn off your
  • Symphony R100 and remove the battery, when you ready just connect your device to computer using USB cable, flash tool will recognize and begin to start flashing process. This will only take 5-10 second to finish.

Recovery file flashing SP Flash Tools - raphsonbd.com

  • If you can see the GREEN CIRCLE on the middle flash tool than the flashing process is finish. Voila You have successfully flashed the custom recovery in your Symphony R100.

Flashing Process Successful by SP Flash Tools - RaphsonBD.com

  • Wait 5-10 second before disconnect your device, put back the battery and turn it on and go to recovery mode by pressing and holding Power Button + Volume Up  and release when you can see custom recovery main menu in your Android Smartphone. Now Your Phone Shall Reboot into Recovery Mode. After that you can go to recovery and take a complete backup of your current stock romRoot your phone or install new Custom ROM .
  • Congratulation! You have now successfully install Symphony R100 Custom Recovery TWRP (Team Win Recovery) (MT6737M).

 

After installing Custom recovery through SP Flash tools, You are now ready to root your Symphony R100.

Here is the guide you can root your root Symphony R100 —

 


 

Related Post

read more
Custom Recovery

Symphony i100 Custom Recovery TWRP (MT6737)

TWRP Custom Recovery Installation Method – Raphsonbd.com

Symphony i100 Custom Recovery TWRP (MT6737) (Download and Installation Method) 

Team Win Recovery Project (TWRP) is an open-source software fully touch supported custom recovery image for android mediatek MT6737 chipset based device such as symphony i100. TWRP 3.2.2 for symphony i100 is the unofficial build which can be ported in any android nougat 7.1.2 running MediaTEK MT6737 chipset based device such as symphony i100. The MT6737 is a power-efficient SoC. This is the stable build of twrp which can be ported for android nougat 7.1.2 running any MT6737 chipset based device. Symphony i100 Custom Recovery TWRP 3.2.2 is free from any major bugs. You can use this recovery to backup your phone’s stock rom, flash new custom rom etc etc. for additional information and download link, check out the full article.

 

Symphony i100 Custom Recovery TWRP (MT6737)

Symphony i100 Custom Recovery TWRP (MT6737) (Download and Installation Method) 
TWRP

 

Description

Recovery Name: TWRP – Team Win Recovery Project

Recovery Version: 3.2.2

Recovery Status:  Stable, Unofficial

Device: Symphony i100

Device Chipset: MT6737 (arm) (32-bit)

Recovery Size: 13.10  MB

Language: English/ Multi language supported

Uploaded by Captain Kenway

 

 Features

  • Install – Flash a ROM or zip,
  • Wipe – Wipe data or factory reset / Advance Wiping option
  • Backup – Make a Nandroid backup
  • Restore – Restore a Nandroid backup
  • Mount – Mount partitions
  • Settings – TWRP Settings (change brightness, interface, language, even you can lock your TWRP)
  • Advanced options
    • Fix permissions
    • ADB Sideload
    • File Manager
  • Advanced Reboot
    • Reboot to System
    • Reboot Recovery
    • Reboot Bootloader
    • Power off
  • Fully touch supported and easy to use interface.

 

Bugs

  • No bugs

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite/Requirements

In order to flash the TWRP – recovery in your Symphony i100, You need to first install the Android CDC and VCOM driver in your computer.

 

Downloads

In order to flash the unofficial build of Symphony i100 Custom Recovery TWRP (MT6737) (Unofficial), first you need to download all the required file from download link below.

 

How To Install TWRP Custom Recovery in Symphony i100

Symphony i100 Custom Recovery TWRP Flashing Method by SP Flash-Tools

  • First and foremost install MTK CDC and VCOM driver in your PC or this flashing method will not going to work. Then download both SP Flash-Tools and TWRP and extract the zip file where you can file the two important file – recovery.img and MT6737_Android Scatter.txt.
  • After that  Go to the SP flash Tool folder and open/execute flash_tool.exe (Run as Administrator is recommended). Turn off your Symphony i100, Connect your phone via USB cable with your PC.

Run SP Flash Tools as administrator - raphsonbd.com

  • Now Goto Scatter-loading section and browse the MT6737_Android Scatter.txt file where you have downloaded it and choose that file. After that you shall see the recovery file is loaded in your window with a √ on it.

How to Flash twrp philz touch custom recovery by SP flash tools

  • Now Click or Download button on above section Flash tool will stand by waiting your device to be disconnected.
  • Turn off your
  • Symphony i100 and remove the battery, when you ready just connect your device to computer using USB cable, flash tool will recognize and begin to start flashing process. This will only take 5-10 second to finish.

Recovery file flashing SP Flash Tools - raphsonbd.com

  • If you can see the GREEN CIRCLE on the middle flash tool than the flashing process is finish. Voila You have successfully flashed the custom recovery in your Symphony i100.

Flashing Process Successful by SP Flash Tools - RaphsonBD.com

  • Wait 5-10 second before disconnect your device, put back the battery and turn it on and go to recovery mode by pressing and holding Power Button + Volume Up  and release when you can see custom recovery main menu in your Android Smartphone. Now Your Phone Shall Reboot into Recovery Mode. After that you can go to recovery and take a complete backup of your current stock romRoot your phone or install new Custom ROM .
  • Congratulation! You have now successfully install Symphony i100 Custom Recovery TWRP (Team Win Recovery) (MT6737).

 

After installing Custom recovery through SP Flash tools, You are now ready to root your Symphony i100.

Here is the guide you can root your root Symphony i100 —

 


 

Related Post

read more
Custom Recovery

Walton Primo GH6 TWRP Installation Method Without PC

TWRP Custom Recovery Installation Method – Raphsonbd.com

Walton Primo GH6 TWRP Installation Method Without PC (FlashiFy) (MT6580) 

If you’re looking for the latest touch supported bug free twrp custom recovery image for Walton Primo GH6, Than you can use this post as a guide to install or flash the recovery in your Walton Primo GH6. Custom recovery installation is the very basic level development of an android. Once you’ve successfully installed TWRP.img in Walton Primo GH6, now you’re good to take a complete backup of your Current Stock ROM or install new Custom ROM.

 

Walton Primo GH6 TWRP Installation Method Without PC

Walton Primo GH6 TWRP Installation Method Without PC
TWRP

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite

You can only use this method, if you already have a Rooted Walton Primo GH6. All the necessary links are added bellow.

Check Out: Walton Primo GH6 Development Portal (Twrp / Root / Custom ROM / Stock Firmware)

 

Download & Requirements

You must need a Rooted Walton Primo GH6 phone.If you didn’t rooted your phone yet, you can use KingRoot.apk to root your Walton Primo GH6. After that, download the flashable twrp files from link bellow.

 

How To Install Twrp Custom Recovery On Walton Primo GH6

Walton Primo GH6 TWRP Installation Method Without PC

  • At First, Copy TWRP for Walton Primo GH6.zip to your phone’s External Memory Card. And extract the zip file. You can get the recovery.img after extracting the folder.
  • Then Install Flashify.apk
  • Open Flashify and Select recovery image.

Flashify recovery flashing process

  • Now a pop up will appear. Choose a file to select one of your file explorer app and browse to the file recovery.img file.

Flashify recovery flashing process

  • Tap on the recovery.img and tap on the YUP
  • After that, your phone will start flashing the zip file and TWRP Custom recovery will be installed.
  • This is the basic process/method of Walton Primo GH6 TWRP Installation Method Without PC.
  • You can easily reboot into custom recovery by pressing Home + volume pressing together for 10 second when your device is fully turned off.
  • Now you can easily backup your stock rom or install new custom roms on your Walton Primo GH6.

Note: If This Method fail anyhow, Then you need to flash the TWRP in your mobile through SP Flash tools. Here is the complete guide to install recovery by SP Flash tool in your Walton Primo GH6

 


 

Related Topic

read more
Custom Recovery

Walton Primo GH6 Custom Recovery TWRP (MT6580)

TWRP Custom Recovery Installation Method – Raphsonbd.com

Walton Primo GH6 Custom Recovery TWRP (MT6580) (Download and Installation Method) 

TWRP aka Team win recovery project for Walton Primo GH6 (MT6580) is a full touch supported custom recovery which allows us to flash custom ROMs, backup your phone, restore from backups and much more. TWRP for Walton Primo GH6 is an open-source software custom recovery image which provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. Custom recovery installation is the very basic level development of an android. Once you’ve successfully installed TWRP.img in Walton Primo GH6, now you’re good to take a complete backup of your Current Stock ROM or install new Custom ROM.

 

Walton Primo GH6 Custom Recovery TWRP (MT6580)

Walton Primo GH6 Custom Recovery TWRP (MT6580) (Download and Installation Method) 
TWRP

 

Description

Recovery Name: TWRP – Team Win Recovery Project

Recovery Version: 3.1.0-3

Recovery Status:  Stable, Unofficial

Device: Walton Primo GH6

Device Chipset: MT6580 (arm) (32-bit)

Recovery Size: 13.3  MB

Language: English/ Multi language supported

Uploaded by Discreet Ninja

 

 Features

  • Install – Flash a ROM or zip,
  • Wipe – Wipe data or factory reset / Advance Wiping option
  • Backup – Make a Nandroid backup
  • Restore – Restore a Nandroid backup
  • Mount – Mount partitions
  • Settings – TWRP Settings (change brightness, interface, language, even you can lock your TWRP)
  • Advanced options
    • Fix permissions
    • ADB Sideload
    • File Manager
  • Advanced Reboot
    • Reboot to System
    • Reboot Recovery
    • Reboot Bootloader
    • Power off
  • Fully touch supported and easy to use interface.

 

Bugs

  • No bugs

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite/Requirements

In order to flash the TWRP – recovery in your Walton Primo GH6, You need to first install the Android CDC and VCOM driver in your computer.

 

Downloads

In order to flash the unofficial build of Walton Primo GH6 Custom Recovery TWRP (MT6580) (Unofficial), first you need to download all the required file from download link below.

 

How To Install TWRP Custom Recovery in Walton Primo GH6

Walton Primo GH6 Custom Recovery TWRP Flashing Method by SP Flash-Tools

  • First and foremost install MTK CDC and VCOM driver in your PC or this flashing method will not going to work. Then download both SP Flash-Tools and TWRP and extract the zip file where you can file the two important file – recovery.img and MT6580_Android Scatter.txt.
  • After that  Go to the SP flash Tool folder and open/execute flash_tool.exe (Run as Administrator is recommended). Turn off your Walton Primo GH6, Connect your phone via USB cable with your PC.

Run SP Flash Tools as administrator - raphsonbd.com

  • Now Goto Scatter-loading section and browse the MT6580_Android Scatter.txt file where you have downloaded it and choose that file. After that you shall see the recovery file is loaded in your window with a √ on it.

How to Flash twrp philz touch custom recovery by SP flash tools

  • Now Click or Download button on above section Flash tool will stand by waiting your device to be disconnected.
  • Turn off your
  • Walton Primo GH6 and remove the battery, when you ready just connect your device to computer using USB cable, flash tool will recognize and begin to start flashing process. This will only take 5-10 second to finish.

Recovery file flashing SP Flash Tools - raphsonbd.com

  • If you can see the GREEN CIRCLE on the middle flash tool than the flashing process is finish. Voila You have successfully flashed the custom recovery in your Walton Primo GH6.

Flashing Process Successful by SP Flash Tools - RaphsonBD.com

  • Wait 5-10 second before disconnect your device, put back the battery and turn it on and go to recovery mode by pressing and holding Power Button + Volume Up  and release when you can see custom recovery main menu in your Android Smartphone. Now Your Phone Shall Reboot into Recovery Mode. After that you can go to recovery and take a complete backup of your current stock romRoot your phone or install new Custom ROM .
  • Congratulation! You have now successfully install Walton Primo GH6 Custom Recovery TWRP (Team Win Recovery) (MT6580).

 

After installing Custom recovery through SP Flash tools, You are now ready to root your Walton Primo GH6.

Here is the guide you can root your root Walton Primo GH6 —

 


 

Related Post

read more
Custom Recovery

Symphony H175 Custom Recovery TWRP (Flashing Method) 

TWRP Custom Recovery Installation Method – Raphsonbd.com

Symphony H175 Custom Recovery TWRP (MT6735) (Download and Installation Method) 

TWRP, is a full touch supported custom recovery which allows us to flash custom ROMs, backup your phone, restore from backups and much more. TWRP for Symphony H175 is an open-source software custom recovery image which provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. Custom recovery installation is the very basic level development of an android. Once you’ve successfully installed TWRP.img in Symphony H175, now you’re good to take a complete backup of your Current Stock ROM or install new Custom ROM.

 

Symphony H175 Custom Recovery TWRP (MT6735) 

Symphony H175 Custom Recovery TWRP (MT6580) (Download and Installation Method) (Flashing Method) 
TWRP

 

Description

Recovery Name: TWRP – Team Win Recovery Project

Recovery Version: 3.1.0-3

Recovery Status:  Stable, Unofficial

Device: Symphony H175

Device Chipset: MT6735 (arm64) (64-bit)

Recovery Size: 13.02  MB

Language: English/ Multi language supported

Uploaded by Hawk 3Ye

 

 Features

  • Install – Flash a ROM or zip,
  • Wipe – Wipe data or factory reset / Advance Wiping option
  • Backup – Make a Nandroid backup
  • Restore – Restore a Nandroid backup
  • Mount – Mount partitions
  • Settings – TWRP Settings (change brightness, interface, language, even you can lock your TWRP)
  • Advanced options
    • Fix permissions
    • ADB Sideload
    • File Manager
  • Advanced Reboot
    • Reboot to System
    • Reboot Recovery
    • Reboot Bootloader
    • Power off
  • Fully touch supported and easy to use interface.

 

Bugs

  • No bugs

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite/Requirements

In order to flash the TWRP – recovery in your Symphony H175, You need to first install the Android CDC and VCOM driver in your computer.

 

Downloads

In order to flash the unofficial build of Symphony H175 Custom Recovery TWRP (MT6580) (Unofficial), first you need to download all the required file from download link below.

 

How To Install TWRP Custom Recovery in Symphony H175

Symphony H175 Custom Recovery TWRP Flashing Method by SP Flash-Tools

  • First and foremost install MTK CDC and VCOM driver in your PC or this flashing method will not going to work. Then download both SP Flash-Tools and TWRP and extract the zip file.
  • After that  Go to the SP flash Tool folder and open/execute flash_tool.exe (Run as Administrator is recommended). Turn off your Symphony H175 , Connect your phone via USB cable with your PC.

Run SP Flash Tools as administrator - raphsonbd.com

  • Now Goto Scatter-loading section and browse  the MT6735_Android Scatter.txt  file where you have downloaded it and choose that file. After that you shall see the recovery file is loaded in your window with a √ on it.

How to Flash twrp philz touch custom recovery by SP flash tools

  • Now Click or Download button on above section Flash tool will stand by waiting your device to be disconnected.
  • Turn off your
  • Symphony H175 and remove the battery, when you ready just connect your device to computer using USB cable, flash tool will recognize and begin to start flashing process. This will only take 5-10 second to finish.

Recovery file flashing SP Flash Tools - raphsonbd.com

  • If you can see the GREEN CIRCLE on the middle flash tool than the flashing process is finish. Voila You have successfully flashed the custom recovery in your Symphony H175.

Flashing Process Successful by SP Flash Tools - RaphsonBD.com

  • Wait 5-10 second before disconnect your device, put back the battery and turn it on and go to recovery mode by pressing and holding Power Button + Volume Up  and release when you can see custom recovery main menu in your Android Smartphone. Now Your Phone Shall Reboot into Recovery Mode. After that you can go to recovery and take a complete backup of your current stock romRoot your phone or install new Custom ROM .
  • Congratulation! You have now successfully install Symphony H175 Custom Recovery TWRP (MT6735).

 

After installing Custom recovery through SP Flash tools, You are now ready to root your Symphony H175.

Here is the guide you can root your root Symphony H175 —

 


 

Related Post

read more
Custom Recovery

Symphony i10 TWRP Installation Method Without PC

TWRP Custom Recovery Installation Method – Raphsonbd.com

Symphony i10 TWRP Installation Method Without PC

If you’re looking for the latest twrp 3.2 custom recovery for Symphony i10, Than you can use this post as a guide to install or flash the recovery in your Symphony i10. Custom recovery installation is the very basic level development of an android. Once you’ve successfully installed TWRP.img in Symphony i10, now you’re good to take a complete backup of your Current Stock ROM or install new Custom ROM.

 

Symphony i10 TWRP Installation Method Without PC

Symphony i10 TWRP Installation Method Without PC
TWRP

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite

You can only use this method, if you already have a Rooted Symphony i10. All the necessary links are added bellow.

Check Out: Symphony i10 Development Portal (Twrp / Root / Custom ROM / Stock Firmware)

 

Download & Requirements

You must need a Rooted Symphony i10 phone.If you didn’t rooted your phone yet, you can use KingRoot.apk to root your Symphony i10. After that, download the flashable twrp files from link bellow.

 

How To Install Twrp Custom Recovery On Symphony i10

Symphony i10 TWRP Installation Method Without PC

  • At First, Copy TWRP for Symphony i10.zip to your phone’s External Memory Card
  • Then Install Flashify.apk
  • Open Flashify and Select Zip File

Flashify recovery flashing process

  • Now a pop up will appear. Choose a file to select one of your file explorer app and browse to the file TWRP for Symphony i10.zip

Flashify recovery flashing process

  • Tap on the TWRP for Symphony i10.zip and tap on the YUP
  • After that, your phone will start flashing the zip file and TWRP Custom recovery will be installed.
  • This is the basic process/method of Symphony i10 TWRP Installation Method Without PC.
  • You can easily reboot into custom recovery by pressing Home + volume pressing together for 10 second when your device is fully turned off.
  • Now you can easily backup your stock rom or install new custom roms on your Symphony i10.

 

Note: If This Method fail anyhow, Then you need to flash the TWRP in your mobile through SP Flash tools. Here is the complete guide to install recovery by SP Flash tool in your Symphony i10

 

 


 

Related Topic

read more
Custom Recovery

Symphony i10 Custom Recovery TWRP (MT6580) 

TWRP Custom Recovery Installation Method – Raphsonbd.com

Symphony i10 Custom Recovery TWRP (MT6580) (Download and Installation Method)

TWRP for Symphony i10 is an open-source software custom recovery image which provides a touchscreen-enabled interface that allows users to install third-party firmware and back up the current system, functions often unsupported by stock recovery images. Custom recovery installation is the very basic level development of an android. Once you’ve successfully installed TWRP.img in Symphony i10, now you’re good to take a complete backup of your Current Stock ROM or install new Custom ROM.

 

Symphony i10 Custom Recovery TWRP (MT6580) 

Symphony i10 Custom Recovery TWRP (MT6580) (Download and Installation Method)
TWRP

 

Description

Recovery Name: TWRP – Team Win Recovery Project

Recovery Version: 3.2

Recovery Status:  Stable, Unofficial

Device Chipset: MT6580

Device: Symphony i10

Recovery Size: 16.00  MB

Language: English/ Multi language supported

Uploaded by Adib Rahman

 

 Features

  • Install – Flash a ROM or zip,
  • Wipe – Wipe data or factory reset / Advance Wiping option
  • Backup – Make a Nandroid backup
  • Restore – Restore a Nandroid backup
  • Mount – Mount partitions
  • Settings – TWRP Settings (change brightness, interface, language, even you can lock your TWRP)
  • Advanced options
    • Fix permissions
    • ADB Sideload
    • File Manager
  • Advanced Reboot
    • Reboot to System
    • Reboot Recovery
    • Reboot Bootloader
    • Power off
  • Fully touch supported and easy to use interface.

 

Bugs

  • No bugs

 

Disclaimer

Modification of your android device such as Rooting or flashing Custom Recovery/Rom/Kernels results to void of the warranty of the device. (We) RaphsonBD and its authors will not responsible for bricked devices / dead SD-card or any damage in your device which is incurred in the process of installing tweaker/ recovery / rom / firmware / rooting / unlocking or any development process the device. We highly advice you to take a backup of your device prior to performing the process. Please do some research if you have any concerns about features included in this ROM, before flashing it! You are choosing to make these modifications. Nevertheless if you need any help, just comments here. We will always pleased to help you.

 

Prerequisite/Requirements

In order to flash the TWRP – recovery in your Symphony i10, You need to first install the Android CDC and VCOM driver in your computer.

 

Downloads

In order to flash the unofficial build of Symphony i10 Custom Recovery TWRP (MT6580) (Unofficial), first you need to download all the required file from download link below.

 

How To Install TWRP Custom Recovery in Symphony i10

Symphony i10 Custom Recovery TWRP Flashing Method by SP Flash-Tools

  • First and foremost install MTK CDC and VCOM driver in your PC or this flashing method will not going to work. Then download both SP Flash-Tools and TWRP and extract the zip file.
  • After that  Go to the SP flash Tool folder and open/execute flash_tool.exe (Run as Administrator is recommended). Turn off your Symphony i10 , Connect your phone via USB cable with your PC.

Run SP Flash Tools as administrator - raphsonbd.com

  • Now Goto Scatter-loading section and browse  the MT6580_Android Scatter.txt  file where you have downloaded it and choose that file. After that you shall see the recovery file is loaded in your window with a √ on it.

How to Flash twrp philz touch custom recovery by SP flash tools

  • Now Click or Download button on above section Flash tool will stand by waiting your device to be disconnected.
  • Turn off your
  • Symphony i10 and remove the battery, when you ready just connect your device to computer using USB cable, flash tool will recognize and begin to start flashing process. This will only take 5-10 second to finish.

Recovery file flashing SP Flash Tools - raphsonbd.com

  • If you can see the GREEN CIRCLE on the middle flash tool than the flashing process is finish. Voila You have successfully flashed the custom recovery in your Symphony i10.

Flashing Process Successful by SP Flash Tools - RaphsonBD.com

  • Wait 5-10 second before disconnect your device, put back the battery and turn it on and go to recovery mode by pressing and holding Power Button + Volume Up  and release when you can see custom recovery main menu in your Android Smartphone. Now Your Phone Shall Reboot into Recovery Mode. After that you can go to recovery and take a complete backup of your current stock romRoot your phone or install new Custom ROM .
  • Congratulation! You have now successfully install Symphony i10 Custom Recovery TWRP (MT6580).

 

After installing Custom recovery through SP Flash tools, You are now ready to root your Symphony i10.

Here is the guide you can root your root Symphony i10 —

 


 

Related Post

read more
1 2 3
Page 1 of 3